MARC Record from Library of Congress

LEADER: 03593cam a22002534a 4500
001 2001044678
003 DLC
005 20050607112710.0
008 010816s2002 nyua 001 0 eng
010 $a 2001044678
020 $a0806969156
040 $aDLC$cDLC$dDLC
042 $apcc
050 00 $aTT199.7$b.B863 2002
082 00 $a729/.5$221
100 1 $aBurton, Mike,$d1944-
245 10 $aArchitectural carving :$btechniques for power & hand tools /$cMike Burton.
260 $aNew York :$bSterling Pub. Co.,$cc2002.
300 $a224 p. :$bcol. ill. ;$c26 cm.
500 $aIncludes index.
505 8 $aMachine generated contents note: PART I -- WOODCARVING TOOLS, MATERIALS & EQUIPMENT -- THE WOODCARVING STUDIO & ITS FIXTURES -- Holding Fixtures A Woodcarver's Bench -- 2 ESSENTIAL WOODCARVING HAND TOOLS -- Chisels, Gouges, etc. * Specialty Tools Acquiring Carving Tools * Numbering * Handles -- Knives * Texturing Tools * Mallets * Rasps, Riffers & So Forth * Sanding Devices a -- Measuring Devices * Handy to Have -- 3USEFUL POWER TOOLS -- Band Saws * Routers * Burrs &Tools to Drive Them * Electrically Powered Chisels * -- Pneumatically Powered Chisels * Angle Grinders * Power Sanders -- 4 SHARPENING WOODCARVING TOOLS -- Factors That Affect Tool Sharpness * Bevels & Cutting Angles * Testing for Sharpness * Tool -- Shape s Stones & Other Sharpening Devices * Sharpening a NewV Tool * Sharpening Steel -- Rasps, Rifflers, Files & Burrs * Power Sharpening -- 5 WOODS FOR CARVING -- Hardwoods * Softwoods * Notes on Gluing -- PART II -- LAYOUT, CARVING & FINISHING TECHNIQUES -- 6 WORKING WITH PATTERNS, PHOTOGRAPHY & MODELS -- Working with Patterns * Working with Photography * Working with Models -- 7 LAYOUT OF SPECIAL SHAPES -- Polygons * Ovals * Spirals &Volutes * Spiral Reeds -- SAFETY PRECAUTIONS FOR WOODCARVERS -- Safety * Hand Position -- 9 INCISED CARVING -- Chip Carving * Triangular Designs a Designs with Curves a A Stylized Sunflower -- 10 RELIEF CARVING -- Applied Carving -- 11 CARVING IN THE ROUND -- Carving Spiral Reeds * Holding the Form -- 12 FINISHING FOR MAXIMUM EFFECT -- Preparation * Patching * Sanding a Staining * Topcoats * Glaze * Strikeout -- A Combination of Glaze & Strikeout -- PART III -- ARCHITECTURAL CARVING WITH POWER & HAND TOOLS -- 13 SET OF TOWEL BARS PROJECT -- Layout * Parting the Twist * Carving the Twist Carving the Leaf Carving the Bar -- Preparing the Plugs -- 14 SPIRAL SHELF SUPPORTS PROJECT -- Layout & Preliminary Steps -- 15 PAIR OF CARVED PANELS PROJECT -- Developing the Pattern * Setting-In the Design * Patching * Cleaning Up What the Router -- Left * Working the Stems u Working the Leaves Working the Flowers & Buds * Texturing -- the Ground -- 16 PAIR OF COLUMN CAPITALS PROJECT -- InitialWork * Working with the Patterns * Setting In the Volute & Shaping the Blank -- 17 DOOR WITH CARVED PANELS PROJECT -- Preparing the Sash * Preparing the Panels -- 18 UNUSUAL DOOR CASING PROJECT -- The Faces * The Plinth Blocks * The Casing -- PART IV -- USEFUL TOOLS & EQUIPMENT YOU CAN BUILD -- 19 POWER STROP & SHARPENING STATION -- The Base The Strop Wheel * An Additional Accessory The Machine in Use -- 20 HOLDING FIXTURES -- For Boards & Planks on Edge For Panels * For Miscellaneous -- 21 ROTATING DEVICES -- A RotatingVise * A Deluxe RotatingVise * Another Rotating Device -- METRIC EQUIVALENTS -- INDEX.
650 0 $aWood-carving.
856 41 $3Table of contents$uhttp://www.loc.gov/catdir/toc/fy022/2001044678.html
856 42 $3Publisher description$uhttp://www.loc.gov/catdir/description/ste021/2001044678.html